Crystal DiffXP Manual de usuario Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
5 DP Measurement Mode: Change the valves as shown
in gure 3 to allow line pressure and dierential pressure
measurement.
a Dierential Pressure: The lower line of the right
hand (–) gauge is the dierential measurement between
both gauges. Place the right hand (–) gauge in averag-
ing mode if further damping is required in the event of
erratic or noisy readings.
6 Vent: Vent left-hand (+) gauge as shown in gure 4.
Reverse both upper valves to vent the right hand (–) gauge.
7 Disconnect Connections: Disconnect connections as
appropriate.
Note: Further detailed information is available in the XP2I-DD
(Dual Display or the unit on the right side). This information
can be found at crystalengineering.net
Figure 3: DP measurement mode (pressure gauge isolation).
C R Y S T A L
XP
2
C R Y S T A L
XP
2
HI
Figure 4: Vent both gauges.
C R Y S T A L
XP
2
C R Y S T A L
XP
2
HI
Specifications
Pressure
Connections: 1/8" female NPT.
System Pressure Limit: Based on lowest pressure rating of
either gauge.
Valving Pressure Limit: 3000 psi maximum.
Accuracy of system using equal pressure range
gauges
20% to 100% of Full Scale: ±(0.14% of Static Line Reading).
0% to 20% of Full Scale: ±(0.028% of Full Scale).
Vacuum for 2000 kPa (300 PSI) and lower pressure gauges:
0 to -99.9 kPa (-14.5 PSIG): ±(0.35% of Full Scale),
Where F.S.: -99.9 kPa (-14.5 PSIG).
Batteries
3 each “D cell. Rotate lid counter-clockwise 90 degrees to
remove.
Battery Life
1200 hours typical.
Temperature
Operating and Compensated: -10C to +50C (14F to 122F).
Storage: -40C to +75C (-40F to 167F).
Display Options
Line or Average (over 10 samples).
Display Rate
3 readings/second.
If used in Average mode, 10 sample window is data taken over
the last 3.33 seconds.
Display Height:
14.5mm (0.55”) Right hand or (–) dual display dierential gauge.
16.5mm (0.65”) If congured with XP2I gauge (left hand
location only).
Media Compatibility:
Liquids and gases compatible with 316 stainless steel.
Enclosure:
Color: Black, watertight, crushproof and dust proof.
IP Rating: IP67.
Weight:
6.1 kg (13 lbs 8 oz)
Size:
37.1 cm x 25.8 cm x 15.2 cm
14.6 in x 10.2 in x 6.0 in
PN: 3540Rev C
Vista de pagina 1
1 2

Comentarios a estos manuales

Sin comentarios

Binatone Telefonini manuali utente

Partendo da S

Cliccare su un alfabeto di seguito per far scorrere la lista completa dei modellif models starting with that letter

Modelli Tipo di Documento
SL450
Manuale Utente   Beafon SL450, 64 pagine
Smart 64
Guida Utente   Binatone Smart 64 User guide, 66 pagine
Smart 66
Guida Utente   Binatone Smart 66 User guide, 65 pagine
Speakeasy 200
Guida Utente   Binatone Speakeasy 200 User guide, 8 pagine
Speakeasy 600
Guida Utente   Binatone Speakeasy 600 120g Silver, 92 pagine
Manuale Utente   Duet 600 u/g for FILM, 2 pagine
Guida Utente   Binatone Speakeasy 600 User guide, 6 pagine