Crystal T-1-CPF Hydraulic Comparator Manual de usuario descargar pdf (Pagina 10)

Operation and Maintenance  8

Type T Pump Operation Manual

Operation and Maintenance



GENERATING PRESSURE

Note: It may be necessary to prime the pump, particularly if the pump has been inactive for an extended period of time. Refer to Priming on page 8

for instructions on priming the pump.

Check that the vent ll plug is fully open by turning it counter-clockwise.

2 Open the vent valve.

Open the vent plug… then open the vent valve.

3 Set the valve rod selector to control your desired uid output volume.

CAUTION: Only move the valve rod selector while the pump handle is stationary, in the up position.

Note: With the valve rod in the “out” position, uid ow will be at maximum and the maximum achievable pressure will be 1000 psi. To exceed 1000 psi, push

the valve rod in.

Low Pressure/

High Volume

High Pressure/

Low Volume

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Operation Manual 1
Type T Series 1
Contents 2
Overview 3
FEATURES AND PARTS LISTS 4
Hydraulic Fluid 5
Ordering a Pump System 5
Safety Instructions 7
ASSEMBLY 8
Setup  7 9
Operation and Maintenance 10
To Prime the Pump 11
Type T Pump Operation Manual 12
Connection Diagrams 14
CRYSTAL REFERENCE INDICATORS 15
Speciﬁcations 16
TROUBLESHOOTING 17
Pump Does Not Hold Pressure 18
Support  17 19
FITTING KITS AND SPARE PARTS 20
Support  19 21
Support  20 22
Support  21 23
CONTACT US 24
RETURNING PRODUCT TO AMETEK 24
WARRANTY 24

Comentarios a estos manuales

Sin comentarios

Crystal T-1-CPF Hydraulic Comparator Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Crystal T-1-CPF Hydraulic Comparator